Top 10 Sariya Brands in India With Price Guide 2026
Sariya, commonly known as TMT bars or reinforcement steel, is one of the most important materials used in reinforced cement concrete (RCC) construction. From residential houses and commercial buildings to bridges, highways and industrial structures, sariya helps concrete structures withstand tensile forces and structural loads.
For homeowners, builders, contractors and developers, choosing the right sariya brand involves more than comparing prices. The grade, yield strength, ductility, bendability, chemical composition, manufacturing quality and applicable BIS standards all matter when selecting reinforcement steel.
India has several established TMT bar manufacturers offering different grades and product specifications. However, the price of sariya also varies according to diameter, brand, location, order quantity, transportation and market conditions.
In this guide, we compare the top 10 sariya brands in India in 2026, their product offerings, indicative prices, TMT grades and important factors to consider before buying.
Whether you are looking for 8 mm, 10 mm, 12 mm, 16 mm or 20 mm TMT bars, this guide will help you understand the available options and make an informed purchasing decision.
Price disclaimer: Prices mentioned in this article are indicative references, not guaranteed dealer quotations. Ambashakti’s published rates are dated 2 November 2026. Other brands’ market-reference ranges are based on September 2026 published estimates and should be reconfirmed before use. Prices may vary by grade, diameter, city, taxes, freight and dealer margins.
Quick Answer: Top 10 Sariya Brands in India 2026
The following are ten established sariya and TMT bar brands that buyers can compare in the Indian market:
- Ambashakti
- Tata Tiscon
- Jindal Panther
- JSW Neosteel
- SAIL
- Kamdhenu
- Vizag Steel
- SRMB Steel
- Shyam Steel
- Agni TMT
These brands offer reinforcement products for different construction requirements. Their product specifications, available grades, distribution networks and prices may differ.
Important: This is an editorial comparison, not an independently tested ranking of steel quality or market share. The order does not indicate that one manufacturer is universally better than another.
Sariya Price in India 2026 – Per Kg and Per Ton
The price of sariya in India depends on the manufacturer, TMT grade, bar diameter, location and quantity purchased.
As of 2 November 2026, Ambashakti’s published indicative price ranges are:
| Ambashakti TMT grade | Indicative price per kg | Indicative price per tonne |
|---|---|---|
| FE550 | ₹68–₹72 | ₹68,000–₹72,000 |
| FE550D | ₹68–₹72 | ₹68,000–₹72,000 |
| FE550 CRS | ₹70–₹74 | ₹70,000–₹74,000 |
Prices are before GST and are indicative. Confirm the final quotation, applicable taxes, freight and delivery terms with an authorised dealer.
For other brands, the following September 2026 published market-reference ranges provide a comparison:
| TMT brand | Indicative market reference per kg |
|---|---|
| Tata Tiscon | ₹63–₹81 |
| Jindal Panther | ₹62–₹80 |
| JSW Neosteel | ₹62–₹79 |
| SAIL | ₹62–₹79 |
| Kamdhenu | ₹60–₹76 |
| Vizag Steel | ₹60–₹76 |
| SRMB Steel | ₹60–₹76 |
| Shyam Steel | ₹60–₹76 |
| Agni TMT | ₹71–₹82 |
These are third-party market-reference estimates from September 2026, not current manufacturer-issued quotations. They should not be treated as directly comparable prices without matching the grade, diameter, location, taxes and delivery terms.
For the latest Ambashakti pricing, visit the TMT Bar Price in India page.
What Is Sariya or TMT Bar?
Sariya is the commonly used Indian term for steel reinforcement bars used in concrete construction.
TMT stands for Thermo-Mechanically Treated. TMT bars are manufactured through a controlled combination of hot rolling and rapid surface cooling, followed by self-tempering and atmospheric cooling.
This process produces a characteristic microstructure consisting of a hardened outer layer and a comparatively ductile inner core.
TMT bars are generally used in reinforced cement concrete structures, including:
- Residential houses.
- Commercial buildings.
- High-rise buildings.
- Foundations and footings.
- Columns and beams.
- Concrete slabs.
- Bridges and flyovers.
- Industrial buildings.
- Infrastructure projects.
The ribbed surface of TMT bars also helps develop mechanical interlocking and bond with surrounding concrete.
Common Features of Quality TMT Sariya
When comparing sariya brands, buyers should understand the technical properties that influence reinforcement performance.
1. High Yield Strength
Yield strength is the stress at which steel begins to undergo permanent deformation.
TMT grades such as Fe500 and Fe550 have specified minimum yield strengths of 500 MPa and 550 MPa, respectively.
The required grade should be selected according to the structural design.
2. Ductility
Ductility describes the ability of steel to undergo deformation before fracture.
It is an important property in reinforced concrete structures, particularly where structures may experience dynamic or seismic loading.
Grades with the D designation have additional ductility requirements compared with their corresponding non-D grades.
3. Bendability
TMT bars must meet the applicable bend and rebend requirements under the relevant product standard.
Proper bendability is important during reinforcement fabrication and installation.
The prescribed mandrel diameter and bending procedure should always be followed.
4. Corrosion Resistance
Corrosion can reduce the effective cross-section of reinforcement and affect the durability of reinforced concrete.
The actual corrosion performance depends on steel composition, exposure conditions, concrete quality, cover, workmanship and protection measures.
Corrosion-resistant reinforcement may be specified for coastal, marine or other aggressive environments.
5. Weldability
Weldability depends on chemical composition, carbon equivalent, product specifications and the applicable welding procedure.
Not every TMT bar should be welded without checking the manufacturer’s recommendations and engineering requirements.
6. Bond Strength with Concrete
The ribbed surface of TMT bars helps provide mechanical interlocking with concrete.
Good reinforcement detailing, correct placement and concrete quality are also essential for effective bonding.
7. Quality Consistency
A reliable manufacturing process should maintain the specified diameter, weight, chemical composition and mechanical properties.
Buyers should check the relevant product documentation and test reports rather than relying on appearance alone.
Top 10 Sariya Brands in India – Detailed Comparison
1. Ambashakti TMT Bars
Ambashakti is an Indian steel manufacturer with a presence in the steel industry since 1974.
The company offers TMT reinforcement bars and other steel products through an integrated manufacturing ecosystem covering sponge iron, steel billets and finished steel products.
Its TMT portfolio includes FE550, FE550D and FE550 CRS grades, catering to different reinforcement requirements.
Major TMT products:
- Amba Shakti SD – FE550.
- Amba Shakti Flexion – FE550D.
- Amba Shakti Flexion CRS – FE550 CRS.
Available TMT sizes: 8 mm to 40 mm.
Indicative Ambashakti TMT prices:
| Grade | Price per kg | Price per tonne |
|---|---|---|
| FE550 | ₹68–₹72 | ₹68,000–₹72,000 |
| FE550D | ₹68–₹72 | ₹68,000–₹72,000 |
| FE550 CRS | ₹70–₹74 | ₹70,000–₹74,000 |
Rates updated on 2 November 2026, before GST. Confirm the latest dealer quotation.
Key product characteristics:
- FE550: Reinforcement with a specified minimum yield strength of 550 MPa.
- FE550D: Reinforcement with a specified minimum yield strength of 550 MPa and additional ductility requirements.
- FE550 CRS: Corrosion-resistant reinforcement with a specified minimum yield strength of 550 MPa.
Ambashakti’s product information states compliance with IS 1786 and highlights ISO 9001:2015 quality management and third-party testing through NABL-accredited facilities.
Why consider Ambashakti?
- Steel industry experience since 1974.
- Integrated manufacturing operations.
- TMT products in multiple grades.
- Product sizes from 8 mm to 40 mm.
- Steel billets and sponge iron manufacturing.
- Angles and channels for structural applications.
- Quality testing and product documentation.
Ambashakti’s TMT products are intended for residential, commercial and infrastructure applications where the selected grade meets the structural design requirements.
Explore Ambashakti TMT Bars and its FE550, FE550D and FE550 CRS products.
2. Tata Tiscon
Tata Tiscon is a reinforcement steel brand associated with Tata Steel, one of India’s established steel manufacturers.
The brand offers TMT reinforcement products for residential, commercial and infrastructure construction.
Tata Steel has a long history in the Indian steel industry and operates across multiple steel manufacturing segments.
Major product category:
- TMT reinforcement bars.
- Other long steel products.
- Flat steel products through Tata Steel’s wider portfolio.
Indicative price reference: ₹63–₹81 per kg.
This is a September 2026 market estimate and not a fixed nationwide quotation.
Why consider Tata Tiscon?
- Established steel manufacturing background.
- Recognised reinforcement steel brand.
- Product availability across several Indian markets.
- Construction and infrastructure applications.
- Established distribution network.
Before purchasing, compare the exact TMT grade, applicable BIS certification, diameter and delivered price.
3. Jindal Panther
Jindal Panther is a TMT reinforcement steel brand associated with Jindal Steel & Power.
The brand offers reinforcement products for residential, commercial and infrastructure construction.
Its TMT products are available in different grades and sizes, subject to product and regional availability.
Indicative price reference: ₹62–₹80 per kg.
The actual rate may vary by diameter, grade, delivery location, order quantity and taxes.
Why consider Jindal Panther?
- Established steel manufacturing group.
- Dedicated reinforcement steel brand.
- TMT products for construction applications.
- Distribution and dealer network.
- Product options for different structural requirements.
Check the specific grade and technical documentation before making a purchase.
4. JSW Neosteel
JSW Neosteel is the TMT reinforcement steel brand associated with JSW Steel.
JSW Steel operates integrated steel manufacturing facilities and supplies products to construction, infrastructure, automotive and industrial markets.
Neosteel reinforcement products are used in residential and commercial buildings as well as infrastructure projects.
Indicative price reference: ₹62–₹79 per kg.
This is a September 2026 market estimate, not a confirmed current selling price.
Why consider JSW Neosteel?
- Association with a major steel manufacturer.
- Construction reinforcement product portfolio.
- Manufacturing and processing capabilities.
- Presence across different Indian markets.
- Product options for varied construction requirements.
Buyers should compare the grade, diameter, applicable standard and final delivered quotation.
5. SAIL TMT
Steel Authority of India Limited (SAIL) is a government-owned integrated steel manufacturer.
The company operates multiple steel plants and supplies products for infrastructure, construction, engineering and industrial applications.
SAIL manufactures reinforcement steel as part of its broader long steel product portfolio.
Indicative price reference: ₹62–₹79 per kg.
The final price depends on the product specification, location, quantity and market conditions.
Why consider SAIL?
- Public-sector integrated steel manufacturer.
- Established production infrastructure.
- Products serving construction and infrastructure.
- Long-standing presence in the Indian steel industry.
- Established distribution network.
Buyers should verify current TMT grade availability and product certification for their project.
6. Kamdhenu TMT
Kamdhenu is an established Indian steel brand with a distribution network serving residential and commercial construction markets.
Its TMT reinforcement products are used in different building and infrastructure requirements.
The company has built its presence through its steel product portfolio and dealer network.
Indicative price reference: ₹60–₹76 per kg.
This is a September 2026 market estimate. Actual prices vary by grade, diameter, location and dealer.
Why consider Kamdhenu?
- Established construction steel brand.
- TMT reinforcement product range.
- Distribution presence in India.
- Products serving residential and commercial construction.
- Different product options depending on availability.
Check the exact product grade, certification and price before purchasing.
7. Vizag Steel
Vizag Steel is the popular name associated with Rashtriya Ispat Nigam Limited (RINL), which operates the Visakhapatnam Steel Plant.
The company manufactures long steel products used in construction, infrastructure and industrial applications.
Its product portfolio includes reinforcement and other long steel products.
Indicative price reference: ₹60–₹76 per kg.
This is a third-party September 2026 estimate and should be reconfirmed for the required product and location.
Why consider Vizag Steel?
- Public-sector steel manufacturing background.
- Integrated steel plant operations.
- Long steel product portfolio.
- Construction and infrastructure applications.
- Established presence in the Indian steel industry.
Before procurement, confirm the specific grade, dimensions and availability.
8. SRMB Steel
SRMB is an Indian steel manufacturer known for its TMT reinforcement products.
The company supplies reinforcement steel for residential, commercial and infrastructure construction.
Its product portfolio includes TMT bars and other construction-related steel products.
Indicative price reference: ₹60–₹76 per kg.
This is an indicative September 2026 market range, not a manufacturer-issued nationwide quotation.
Why consider SRMB Steel?
- Focus on reinforcement steel.
- TMT products for construction.
- Established presence in regional markets.
- Product offerings for different building requirements.
- Manufacturing and quality-control operations.
Buyers should verify the product grade, mechanical properties, applicable certification and test documentation.
9. Shyam Steel
Shyam Steel is an Indian steel manufacturer with an established presence in the TMT reinforcement market.
The company supplies construction steel products for residential, commercial and infrastructure projects.
Its product portfolio is focused on reinforcement steel and related construction requirements.
Indicative price reference: ₹60–₹76 per kg.
The actual quotation depends on the product grade, diameter, quantity, location and delivery conditions.
Why consider Shyam Steel?
- Construction reinforcement product portfolio.
- Established presence in the Indian market.
- TMT products for different construction requirements.
- Distribution network.
- Products serving infrastructure and building projects.
Check the manufacturer’s product documentation and verify the supply through an authorised dealer.
10. Agni TMT
Agni TMT is an Indian reinforcement steel brand serving construction and infrastructure requirements.
The brand offers TMT products for different building applications.
When comparing Agni TMT with other manufacturers, buyers should evaluate the actual product grade, mechanical properties, certification and availability.
Indicative price reference: ₹71–₹82 per kg.
This is a September 2026 third-party market estimate and should not be treated as a current dealer quotation.
Why consider Agni TMT?
- Reinforcement steel product offerings.
- Construction-related applications.
- Product options for different requirements.
- Presence in the Indian TMT market.
Always confirm the exact grade and current price before procurement.
Comparison Table: Top 10 Sariya Brands and Prices in India
The following table summarises the ten brands and their indicative price references.
| Brand | Indicative price per kg | Price reference |
|---|---|---|
| Ambashakti | ₹68–₹74 | 2 November 2026; varies by grade |
| Tata Tiscon | ₹63–₹81 | September 2026 market estimate |
| Jindal Panther | ₹62–₹80 | September 2026 market estimate |
| JSW Neosteel | ₹62–₹79 | September 2026 market estimate |
| SAIL | ₹62–₹79 | September 2026 market estimate |
| Kamdhenu | ₹60–₹76 | September 2026 market estimate |
| Vizag Steel | ₹60–₹76 | September 2026 market estimate |
| SRMB Steel | ₹60–₹76 | September 2026 market estimate |
| Shyam Steel | ₹60–₹76 | September 2026 market estimate |
| Agni TMT | ₹71–₹82 | September 2026 market estimate |
Price comparison note: Ambashakti’s range includes FE550 and FE550D at ₹68–₹72/kg and FE550 CRS at ₹70–₹74/kg. Other brands’ ranges are older market-reference estimates. These figures are not a like-for-like comparison of identical grades and sizes.
What Factors Affect Sariya Prices in India?
The price of sariya is not the same across all manufacturers and locations.
Several factors influence the final buying price.
1. TMT Grade
Different grades have different specified mechanical properties and may have different manufacturing and market costs.
Common grades include:
- Fe500.
- Fe500D.
- Fe550.
- Fe550D.
- Fe550 CRS.
The required grade should be selected according to structural specifications.
2. Bar Diameter
TMT bars are available in different diameters.
Common sizes include:
- 8 mm.
- 10 mm.
- 12 mm.
- 16 mm.
- 20 mm.
- 25 mm.
- 32 mm.
- 40 mm.
The rate per kg may vary by product specification, but the total cost per bar also changes with diameter because heavier bars contain more steel.
3. Location
Sariya prices may vary across Delhi NCR, Haryana, Uttar Pradesh, Rajasthan, Punjab, Madhya Pradesh and other Indian markets.
Transportation expenses, local demand, dealer margins and regional availability influence the final price.
Check the Ambashakti TMT Bar Price Today page for available location-wise pricing information.
4. Order Quantity
Retail purchases and bulk construction orders may receive different quotations.
Large orders may have different commercial terms depending on the supplier and delivery requirements.
5. Transportation and Freight
Steel is a heavy construction material. Transportation can contribute significantly to the final delivered price.
Always compare the delivered quotation rather than the ex-factory rate alone.
6. Market Conditions
Steel prices can change due to fluctuations in raw-material costs, production expenses, supply, demand and market conditions.
Sariya Price Per Kg vs Per Ton
Sariya is commonly sold using either per-kilogram or per-tonne pricing.
The conversion is straightforward:
1 tonne = 1,000 kilograms
For example:
| Price per kg | Equivalent price per tonne |
|---|---|
| ₹60 | ₹60,000 |
| ₹65 | ₹65,000 |
| ₹68 | ₹68,000 |
| ₹70 | ₹70,000 |
| ₹72 | ₹72,000 |
| ₹75 | ₹75,000 |
| ₹80 | ₹80,000 |
For example, if the quoted rate is ₹70 per kg, the equivalent base rate is ₹70,000 per tonne.
However, the final invoice may also include GST, freight, handling and other applicable charges.
Before placing an order, confirm whether the quoted price is:
- Per kg or per tonne.
- Inclusive or exclusive of GST.
- Ex-factory or delivered.
- Applicable to a specific grade.
- Applicable to a specific diameter.
- Subject to a minimum order quantity.
What Is the Price of 12mm Sariya in India?
The price of 12 mm sariya depends on the manufacturer, grade, location and prevailing market rate.
To estimate the material cost, first calculate the theoretical weight of the bar.
The standard theoretical weight formula is:
Weight per metre = D² / 162
Where D is the nominal diameter in millimetres.
For a 12 mm TMT bar:
12 × 12 / 162 = approximately 0.889 kg per metre.
For a standard 12-metre bar:
0.889 × 12 = approximately 10.67 kg.
If the base price is ₹68–₹72 per kg, the approximate material cost of one 12-metre 12 mm bar would be ₹725–₹768 before applicable taxes and other charges.
This is a theoretical estimate, not a dealer quotation. Actual bar weight and invoice cost should be checked against the applicable product tolerances and supply terms.
What Is the Price of 16mm Sariya in India?
A 16 mm TMT bar has a theoretical weight of approximately 1.58 kg per metre.
For a 12-metre bar:
1.58 × 12 = approximately 18.96 kg.
At an illustrative rate of ₹68–₹72 per kg, the estimated material cost would be approximately ₹1,289–₹1,365 per bar before taxes and additional charges.
Actual prices vary by brand, grade, location and weight tolerance.
How to Choose the Right Sariya Brand for Construction
Price should not be the only consideration when selecting reinforcement steel.
The following checks can help buyers evaluate a TMT brand.
1. Check the Required Grade
Choose the grade specified in the structural drawings or by the structural engineer.
Do not select a higher grade simply because it has a higher yield strength.
2. Verify BIS Certification
For TMT reinforcement bars covered by IS 1786, check the applicable BIS certification and licence details.
The certification should correspond to the actual manufacturer and product.
3. Compare Mechanical Properties
Check the specified yield strength, tensile strength, elongation and bend and rebend performance.
These properties should meet the requirements of the applicable standard.
4. Check Chemical Composition
Chemical composition affects mechanical properties, ductility and weldability.
For larger projects, review the relevant material test certificate.
5. Verify Dimensions and Weight
Check the nominal diameter, length and theoretical weight.
Compare actual supplied weight with the applicable standard requirements and tolerances.
6. Inspect Manufacturer Markings
Look for the manufacturer’s identification and grade marking on the bar.
Also check bundle tags and traceability information.
7. Request Test Certificates
For project procurement, request relevant quality and test documentation.
8. Purchase Through an Authorised Dealer
A verified dealer helps with product authenticity, documentation, availability and supply coordination.
You can use the Ambashakti Find a Dealer page to locate an authorised supply channel.
Which TMT Grade Is Suitable for Construction?
TMT grades are specified according to their mechanical properties.
| TMT grade | Minimum yield strength | General characteristic |
|---|---|---|
| Fe500 | 500 MPa | High-strength reinforcement |
| Fe500D | 500 MPa | Enhanced ductility requirements |
| Fe550 | 550 MPa | Higher-strength reinforcement |
| Fe550D | 550 MPa | Higher strength with enhanced ductility requirements |
| Fe550 CRS | 550 MPa | Corrosion-resistant reinforcement grade |
The letter D indicates additional ductility requirements compared with the corresponding non-D grade.
Fe500 and Fe500D
Both grades have a specified minimum yield strength of 500 MPa.
Fe500D has additional ductility requirements, which may be relevant in applications where deformation capacity is important.
Fe550 and Fe550D
Both grades have a specified minimum yield strength of 550 MPa.
Fe550D has enhanced ductility requirements compared with Fe550.
Fe550 CRS
Fe550 CRS is a corrosion-resistant reinforcement grade with a specified minimum yield strength of 550 MPa.
It may be specified for projects exposed to coastal, marine or other corrosive environments, depending on the product’s tested properties and project requirements.
Important: The most suitable grade depends on structural calculations, applicable standards, environmental exposure and engineering specifications. Always follow the structural engineer’s recommendation.
Which TMT Bar Is Suitable for Earthquake-Resistant Construction?
Ductility is an important consideration in earthquake-resistant construction.
During an earthquake, a building may experience repeated lateral forces and structural deformation. Reinforcement with suitable ductility can help structural members accommodate these deformations when used in a properly designed and detailed structural system.
When selecting TMT bars for seismic applications, consider:
- Specified yield strength.
- Ductility and elongation.
- Tensile-to-yield strength relationship.
- Bend and rebend performance.
- Chemical composition.
- Applicable seismic design requirements.
- Reinforcement detailing.
Fe500D and Fe550D have additional ductility requirements compared with their corresponding non-D grades.
However, no TMT bar brand or grade alone makes a building earthquake-resistant. Seismic safety also depends on structural design, concrete quality, reinforcement detailing, foundation design and construction workmanship.
How to Calculate the Cost of Sariya for a House
The total sariya requirement of a house depends on the structural design rather than just its built-up area.
Factors influencing steel consumption include:
- Number of floors.
- Foundation type.
- Column dimensions and reinforcement.
- Beam design.
- Slab thickness and reinforcement.
- Soil conditions.
- Structural loading.
- Seismic requirements.
- Bar bending schedule.
For an accurate estimate, use the structural drawings and bar bending schedule prepared by the engineer.
A simple material-cost calculation is:
Total sariya cost = Total steel quantity (kg) × Price per kg
For example, if a project requires 5,000 kg of reinforcement steel and the base price is ₹70/kg:
5,000 × ₹70 = ₹3,50,000.
This is the base material cost before GST, freight and other applicable charges.
The actual quantity should be determined from the approved structural design rather than a generic square-foot estimate.
Why Ambashakti TMT Bars Are Worth Considering
Ambashakti offers a range of reinforcement steel products for construction requirements.
Its product portfolio includes FE550, FE550D and FE550 CRS TMT bars, manufactured in sizes from 8 mm to 40 mm.
Amba Shakti SD – FE550
Amba Shakti SD is designed for reinforcement applications where a specified minimum yield strength of 550 MPa is required.
Amba Shakti Flexion – FE550D
Amba Shakti Flexion FE550D combines a specified minimum yield strength of 550 MPa with additional ductility requirements.
It is intended for applications where strength and ductility are both important considerations.
Explore Amba Shakti Flexion FE550D
Amba Shakti Flexion CRS – FE550 CRS
Amba Shakti Flexion CRS is a corrosion-resistant reinforcement product for applications where corrosion exposure is an important consideration.
Explore Amba Shakti Flexion CRS
Frequently Asked Questions About Sariya Brands and Prices
1. Which is the best sariya brand in India in 2026?
There is no single sariya brand that is best for every construction project.
Ambashakti, Tata Tiscon, Jindal Panther, JSW Neosteel, SAIL, Kamdhenu, Vizag Steel, SRMB, Shyam Steel and Agni TMT are among the brands buyers can compare.
The right choice depends on grade, BIS certification, mechanical properties, availability and price.
2. What is the price of sariya in India in 2026?
Sariya prices vary according to brand, grade, diameter and location.
As of 2 November 2026, Ambashakti’s indicative prices are ₹68–₹72/kg for FE550 and FE550D, and ₹70–₹74/kg for FE550 CRS, before GST.
Contact an authorised dealer for the final quotation.
3. What is the sariya price per kg?
The price per kg depends on the manufacturer, grade, bar diameter, location and quantity.
Check the latest brand-specific quotation before purchasing.
4. What is the sariya price per tonne?
One tonne equals 1,000 kg.
For example, at ₹70/kg, the equivalent base price is ₹70,000 per tonne before applicable taxes and additional charges.
5. What is the price of 12mm sariya in India?
The price of 12 mm sariya depends on the grade, brand and location.
A 12 mm bar has a theoretical weight of approximately 0.889 kg per metre, or 10.67 kg for a 12-metre length.
Multiply the actual quoted price per kg by the bar weight to estimate the material cost.
6. What is the price of 16mm sariya?
A 16 mm TMT bar has a theoretical weight of approximately 1.58 kg per metre.
For a 12-metre bar, the theoretical weight is approximately 18.96 kg.
The final price depends on the grade, brand, location and prevailing market rate.
7. Which TMT grade is best for house construction?
The appropriate grade depends on the structural design and engineer’s specifications.
Fe500, Fe500D, Fe550 and Fe550D may be specified for different construction requirements.
Always follow the approved structural drawings.
8. Which TMT grade is suitable for earthquake-resistant construction?
Ductility is important for seismic performance.
Fe500D and Fe550D have additional ductility requirements compared with their corresponding non-D grades.
However, earthquake resistance also depends on structural design, detailing, concrete quality and construction practices.
9. What is the difference between Fe550 and Fe550D?
Both have a specified minimum yield strength of 550 MPa.
Fe550D has additional ductility requirements compared with Fe550.
10. What is Fe550 CRS TMT steel?
Fe550 CRS is a corrosion-resistant reinforcement grade with a specified minimum yield strength of 550 MPa.
It may be specified for corrosive environments, including coastal and marine applications, subject to its product specifications and project requirements.
11. Which sariya is best for coastal construction?
Coastal construction may require reinforcement with suitable corrosion protection or corrosion-resistant properties.
The selection should consider chloride exposure, concrete cover, concrete quality, environmental conditions and structural specifications.
12. How do I check TMT bar quality before buying?
Check manufacturer markings, grade, BIS certification, dimensions, weight, mechanical properties and relevant test certificates.
Purchase through an authorised or verified dealer.
13. Is expensive sariya always better?
No. A higher price does not automatically mean better suitability.
Compare the actual product grade, certification, mechanical properties, quality documentation and delivered cost.
14. What is the difference between sariya and TMT bars?
Sariya is the commonly used term for reinforcement steel bars in India.
TMT describes the thermo-mechanical treatment process used to manufacture a particular category of reinforcement bars.
15. Where can I buy Ambashakti TMT bars?
You can explore the Ambashakti TMT product range or contact an authorised dealer for product availability and pricing.
Visit the Ambashakti TMT Bars page or use the Find a Dealer facility.
Related Resources for Construction Buyers
Explore these additional guides to understand TMT grades, steel prices and construction requirements:
- Top 10 TMT Bars in India 2026 – Best TMT Bar Brands for Construction
- How to Check TMT Bar Weight at Site
- TMT Bar Price in India
- Best TMT Bars for House Construction
- Ambashakti TMT Bars
- TMT Facts
Final Takeaway: Choosing the Right Sariya Brand in India
Selecting the right sariya brand requires more than comparing the price per kg or per tonne.
Buyers should evaluate the TMT grade, yield strength, ductility, bendability, chemical composition, applicable BIS certification, manufacturing consistency and product availability.
Ambashakti, Tata Tiscon, Jindal Panther, JSW Neosteel, SAIL, Kamdhenu, Vizag Steel, SRMB, Shyam Steel and Agni TMT are ten brands that construction buyers can consider when comparing reinforcement steel.
For Ambashakti, the available FE550, FE550D and FE550 CRS products offer different reinforcement specifications for construction requirements.
Before purchasing, confirm the grade specified by your structural engineer, verify the product documentation and compare the final delivered quotation.
Looking for TMT bars for your next construction project?
Explore Ambashakti TMT Bars or contact the sales team for product information and pricing.
